High Consistency Hydrapulper mainly used in waste paper recycling deinking line of toilet paper and culture paper. Separating waste paper and ink under high consistency in waste paper deinking process efficiency. In order to help customers to install, our professional engineer make the methods as below.
1. According to the requirements of the foundation diagram, the center line is determined, and the corresponding position dimensions are corrected. The reinforced concrete pouring equipment foundation is used.
2. Unpacking and acceptance, check that all parts are complete, and clean the parts with anti-rust grease.
3. After a certain period of maintenance (usually 15 days) and the base is correct, the equipment can be installed. Pre-hang the anchor bolts on the equipment, lift the equipment to the foundation, and adjust the level to pour concrete into the reserved holes of the anchor bolts.
4. Install the motor, pay attention that the two pulleys should not be twisted on the same level.
5. After a certain maintenance period (usually 15 days), correct the vertical deviation of the center of the equipment so that it does not exceed 0.15mm / m, then tighten the anchor bolts, perform secondary casting, and pour the floor in the concrete.
Want to know more details about the installation methods of high consistency hydrapulper or another pulping equipment in waste paper deinking line, free to contact us. Email address: firstname.lastname@example.org.
This line includes Chain Conveyor, Drum Pulper, D Type Hydrapulper, Mid Consistency Pressure Screen, Double Disc Refiner, Inflow Pressure Screen, and so on. Paper pulp machine used to make waste paper (such as waste packing box,waste office paper and so on) turn to fine pulp for paper forming on the paper machine.